; ; *** Listing 10-13 *** ; ; Clears a 1000-byte block of memory via BlockClearW, ; which handles blocks between 0 and 64K-1 bytes in ; length. BlockClearW uses STOSW rather than STOSB to ; the greatest possible extent in order to improve ; performance. ; jmp Skip ; ARRAY_LENGTH equ 1000 ByteArray db ARRAY_LENGTH dup (?) ; ; Clears a block of memory CX bytes in length. A value ; of 0 means "clear zero bytes," so the maximum length ; that can be cleared is 64K-1 bytes and the minimum ; length is 0 bytes. ; ; Input: ; CX = number of bytes to clear ; ES:DI = start of block to clear ; ; Output: ; none ; ; Registers altered: AX, CX, DI ; ; Direction flag cleared ; BlockClearW: sub ax,ax ;we'll fill with the value 0 shr cx,1 ;divide by 2, copying the odd-byte ; status to the Carry flag cld ;make STOSW move DI up rep stosw ;clear the block jnc ClearDone ;the Carry status is still left over ; from the SHR. If we had an even # ; of bytes, we're done stosb ;clear the odd byte ClearDone: ret ; Skip: call ZTimerOn mov di,seg ByteArray mov es,di ;point ES:DI to the array to clear mov di,offset ByteArray mov cx,ARRAY_LENGTH ;# of bytes to clear call BlockClearW ;clear the array call ZTimerOff